Advice

The right sealant for your application!

To help you find a suitable SABA sealant or adhesive sealant, SABA has developed this product recommendation tool. In three steps, you will know which SABA products may be suitable for your application. Ready to make a choice? We will be happy to help you with a consultation!

Product Recommendations

Select your material and the load to which the seal and/or bonding is exposed. You will then receive advice about the pre-treatment products that you can use in your situation.

Product selection aid
Our recommendation

On the basis of the above situation, we recommend that you use one of the following products.

  • {{ product.teaserusp1 }}
  • {{ product.teaserusp2 }}
  • {{ product.teaserusp3 }}

Questions about our advice?

Contact one of our specialists

Contact us
General advice
For further technical information, please consult the product sheet. This can be found on the product page of the respective product. Substrates and conditions are different for every project, so we strongly advise you to contact us before making your choice.

Our advice and instructions for use are based on the current state of knowledge and technology. Customers and users should evaluate our products themselves, with regard to the use and requirements of their choice. We take no responsibility if our products are not used according to our recommendations and/or instructions for use.

NB!
There are many materials available in the market. SABA has tested the most common materials, but cannot guarantee that the correct products for your application are recommended in this document. We therefore always recommend that you contact SABA for an adhesion test if necessary.
Disclaimer

Our recommendation

First follow the steps above, so that we can advise you on the most suitable products for your situation.