Your news source on sealants and adhesives

At SABA, we work continually with our customers on the development of our adhesives and sealants. On this page, we are pleased to keep you informed on new products and our participation in trade fairs, vacancies, and other developments within SABA and in our markets. Check out this page frequently, or sign up for our newsletter! Also check out our LinkedIn page and our YouTube channel!

Interview - Prof. Dr. Andreas Groß about DIN 2304


"For me, adhesive bonding will be the no. 1 joining technology in the 21st century.The only proviso is: "applied correctly"."

Interview - Prof. Dr. Andreas Groß about DIN 2304

Sabatack® 950 Boost


SABA introduces a new adhesive with booster which cures fast and homogeneously through the complete applied adhesive independent from environmental factors

SABA @ Bäumer open house


"THE ART OF HIGH PERFORMANCE": That is the theme for Bäumer's third open house. This event will be held on 18 and 19 October at its headquarters in Freudenberg, Germany. SABA will have its own booth at Bäumer's Open House, along with other members from the PU industry. SABA will inform you on the latest products and trends in water-based foam bonding adhesives.

Adhering to sustainability


A glimpse at the construction of the New University Building in Amsterdam

When developing new buildings, looking after people and the environment is increasingly taking precedence. This is also the case in the developments on the campus of the Vrije Universiteit in Amsterdam, where Zwapex Afdichtingstechniek B.V. has started work using the sustainable sealants produced by SABA. The development of the VU campus has been in full swing for years. A number of buildings dating back to the 1970s have been due for refurbishment or replacement in order to meet the needs of our time. One of the largest projects on the campus is the construction of the 'New University Building'. It is a building that defines the image of the area, with sustainability as the number one priority.

Ambulanz Mobile


Produced in Schönebeck (D), saving lives all around the world: The company Ambulanz Mobile has been involved in converting transport vehicles to rescue vehicles for relief and rescue services for over 26 years. Every year, the company from the east of Germany with around 280 employees produces approximately 1,600 vehicles.

Its cooperation with SABA resulted when Ambulanz Mobile was looking for a solution for the adhesion of ABS plastics. ABS is often used in the interior of ambulances, but as a substrate for bonding work, it throws up certain challenges. Sabatack® has been used successfully for many years in various manufacturing processes of Ambulanz Mobile.

SABA North America Celebrates its 10th Anniversary by Giving Back


Kimball, Michigan, USA, August 2018 – SABA is pleased to announce a donation of $10,000 to Save a Child's Heart (SACH) in celebration of the 10th anniversary of SABA North America. Additionally, $12,000 was divided evenly between four other charities based upon pitches submitted explaining how they would benefit from a donation. SACH selected the four recipients from a significant number of submissions.

Let's meet in Shanghai!


FMC China / 11-14 September / hall N10 stand E31
SABA Adhesives: Water-based Foam Bonding Adhesives!

Company Special Cuppers Carrosserieën B.V


Cuppers Carrosserieën B.V. in Lichtenvoorde (NL) is a producer of all sorts of bodywork for every make of truck. The company also supplies complete trailers and semi-trailers with every required form of superstructure. Over the years, the company has specialised in trucks for livestock transportation, which are sold all over the world. The Company Special explains more about this company and how it uses Sabatack® Fast in its production process.

Will we see you soon in Birmingham?


Will we see you soon in Birmingham? We very much look forward to welcoming you to the Commercial Vehicle Show 2018 from 24 to 26 April. You will find us at Stand 4K36 in Hall 4.

DeRucci presents Suplliers award to SABA


A heartfelt "thank you" to our respected client DeRucci furniture for presenting SABA with their Suppliers award. DeRucci furniture is a leading high-end bedding company and brand in China with more than 3000 stores in China and abroad.



Let's meet at ISPA EXPO in Charlotte, NC / March 14-16, 2018 / booth 520

Let's meet at StocExpo 2018 from 20 to 22 March!


Stand B12!

Promatap conference 2018 in Łódź, Poland


SABA Polska, together with other suppliers of the furniture and mattress industry, once again organizes the Promatap conference in Łódź, Poland.

Get to know SABA on the trade fair floor!


We would like to meet you at one of the trade fairs shown below. A trade fair is a wonderful place for conversation, to exchange knowledge and to better understand how we can collaborate.

PRESS RELEASE - Faster, cheaper and more sustainable production thanks to Sabatack® Fast


Adhesive and sealant producer SABA has introduced Sabatack® Fast as an innovation for the bus and touring car industry.

​Sabatack®: environment and people-friendly


Have you noticed that our Sabatack® adhesives and sealants do not carry any hazard symbols? That's right!

​The use of plastics in the transport industry


A trend in the transport industry is the focus on light(er) vehicles. Through the use of different materials, such as plastics or adhesives instead of metal connections, vehicle weights can be substantially reduced, leading to lower fuel consumption and a significant reduction in negative emissions.

Providing Sustainability through Innovation


We would like to invite you to read the full article from SABA North America in the Widgets 'What we're made of' issue from the publishers of Furniture Today.

Professional joint sealants for flood floor


A high quality joint sealant is essential for correct performance of a flood floor in greenhouse horticulture. SABA is your specialised partner for this. Read all about a recently delivered project in greenhouse horticulture.

Fast and clean sealant application at Tallinn Airport


The SABA Lance LD-40, suitable for processing large volumes of sealant, has been used for repair work on platforms at Tallinn Airport, to the full satisfaction of the application company and the airport. Read all about this project.

Advice on upgrading floors for urea plant


Some of the floors of the urea plants at Yara Sluiskil were ready for refurbishment. On advice, these floors have now been upgraded with SABA Sealer MB and MB-T. Read more and request advice for your project!

Back to basics: water-based adhesives


Let's go back to basics so that you can make the best choice. Water-based adhesives are carried by water and are free of any solvents. Better for you and for the environment!

Product information: changes in the range


A number of changes have been made to our range. Click to view the changes and your benefits!

Let's meet: Michael Rözer, European Sales Manager


We would like to introduce you to our staff. This time, we would like to you to meet Michael Rözer, our European Sales Manager, who has been working at SABA since the late eighties - he even met his wife here. Read on for the interview with Michael!

New brochure available!


Our new brochure is available now! All SABA products and systems for your infrastructural and biochemical projects at a glance. Find out which product is applicable for your project.

Interview Commercial Director SABA Polska


We would like to invite you to read the interview with Commercial Director of SABA Polska – Ewa Frankowska-Śrama in the monthly „BIZNES".

Securely sealed! SABA AfdichtingsTechniek and DSA


Under the supervision of SABA AfdichtingsTechniek BV, DSA has performed all the accompanying sealing work in various expansion joints on the road bridge on the N317 near Doesburg.

Interview SABA North America President: Jim Turner


We would like to invite you to read the article with the President of SABA North America, Jim Turner, in the monthly BedTimes Magazine.

Welcome to our new SABA website!


Welcome to our new SABA website! This new website shows who we are and what we do. How we progress. And that we are investing in the future. Our ultimate objective is to provide optimum services to you.

SABA advises: redesign of De Ruijterkade, Amsterdam


You can also call on SABA for advice. SABA is working on an advisory report on the application of Sabaprotect M500 for the redesign of the De Ruijterkade.

SABA Sealcoat CR(-T): ready for the future!


Time has proved that SABA Sealcoat CR(-T) is ready for the future. Make sure that your site is ready for the future too.

Waterproof Sealing with DSA and SABA!


An ingenious solution and implementation by DSA B.V., using SABA Flexform and SABA Sealer MB-T, produced a waterproof parking deck. Read all about SABA's successful waterproof sealing!